
<div class="publication-info">
	<h3>On the nature of the high sensitivity of Fe-Ni and Fe-Ni-Co maraging steels with titanium to delayed failure / Berezovskaya V.V. // Russian Metallurgy (Metally). - 2003. - V. 2003, l. 5. - P. 419-428.</h3>
	<dl>
		<dt>ISSN:</dt><dd>00360295</dd>
		<dt>Type:</dt><dd>Article</dd>
				<dt>Abstract:</dt><dd>The structure, properties, and delayed failure (DF) of Fe-Ni and Fe-Ni-Co maraging steels (MASs) were studied. The DF of the MASs was shown to be a two-factor process proceeding under mechanical and chemical actions. The study of the initial stages of decomposition of the supersaturated solid solution showed that the DF of 01N18M4T and 03N18K3M3T maraging steels developed at a high crack growth rale (1.3 × 10-6 and 6.3 × 10 -5 m/s, respectively) via intercrystalline cleavage. The DF was found to be controlled by the aging stage described by the Johnson-Mehl equation with a constant of the time exponent n = 0.12-0.17. According to the reported data, this stage corresponded to the formation of Guinier-Preston zones. The 03N18K3M3T steel underwent DF and had a virtually one-component {110} α crystallographic texture. This texture was retained in the austenite after hot forging and was inherited by the martensite due to the oriented characters of the α ⇆ γ transformations and the decomposition of the supersaturated solid solution. The aging stage at n = 0.12-0.17 was detected only in the textured MASs. A decrease in the sharpness of texture in the MASs is considered to be one of the methods of increasing their resistance to DF. Copyright © 2003 by MAIK "Nauka/ Interperiodica".</dd>
		<dt>Author keywords:</dt><dd></dd>
		<dt>Index keywords:</dt><dd>нет данных</dd>
		<dt>DOI:</dt><dd>нет данных</dd>
		<dt>Смотреть в Scopus:</dt>
			<dd>
								<a href="https://www.scopus.com/inward/record.uri?eid=2-s2.0-33748511490&partnerID=40&md5=b965cbecc595396601503e0a9b2baceb" target="_blank">https://www.scopus.com/inward/record.uri?eid=2-s2.0-33748511490&amp;partnerID=40&amp;md5=b965cbecc595396601503e0a9b2baceb</a>
							</dd>

		<dt>Соавторы в МНС:</dt>
		<dd>
		&mdash;		</dd>

				<dt>Другие поля</dt>
		<dd>
			<table class="v-table">
			<thead>
				<tr>
					<td class="w8 gar">Поле</td>
					<td>Значение</td>
				</tr>
			</thead>
			<tbody>
								<tr>
						<td class="gar">Link</td>
						<td>https://www.scopus.com/inward/record.uri?eid=2-s2.0-33748511490&partnerID=40&md5=b965cbecc595396601503e0a9b2baceb</td>
					</tr>
										<tr>
						<td class="gar">Affiliations</td>
						<td>Ural State Technical University, ul. Mira 19, Ekaterinburg, 620002, Russian Federation</td>
					</tr>
										<tr>
						<td class="gar">References</td>
						<td>Filippov, G.A., Sarrak, V.I., Perkas, M.D., The phenomenon of the delayed fracture of maraging steels (1976) Dokl. Akad. Nauk SSSR, 226 (4), pp. 819-822; Filippov, G.A., Sarrak, V.I., Perkas, M.D., Motrenko, V.F., Effect of titanium on the tendency to delayed fracture of maraging steel (1982) Fiz. Met. Metalloved., 54 (1), pp. 163-168; Zaitseva, R.D., Perkas, M.D., Factors influencing the ductility and toughness of maraging steels (1975) Metalloved., Term. Obrab. Met., (9), pp. 2-11; Zabil'skii, V.V., Velichko, V.V., Il'ina, S.G., Delayed fracture of maraging steels: I. The effect of test environment (air or vacuum) (1995) Phys. Met. Metallogr., 80 (6), pp. 676-682; Zabil'skii, V.V., Velichko, V.V., Gil'mutdinov, F.Z., Delayed fracture of maraging steels: 2. Mechanism of grain-boundary embrittlement upon tests in air (1997) Phys. Met. Metallogr., 83 (2), pp. 215-224; Smirnov, M.A., Pushin, V.G., Kareva, N.T., The effect of high-temperature deformation on delayed fracture of maraging steels (1982) Fiz, Met. Metalloved., 53 (5), pp. 1021-1026; Toidorova, I.S., Zabil'skii, V.V., Sarrak, V.I., Delayed fracture of maraging steels (review) (1991) Fiz. Met. Metalloved., (7), pp. 5-11; Khorushi, M., Kuribayasi, K., Kavasaki, S., Ni-Ti maraging steels with high toughness and resistance to delayed failure (1989) Kokoi Tokke Kokho, 3 (4-614), pp. 191-196; Asayama, Y., Delayed failure of ultrahigh strength 18% Ni maraging steels (1982) Japan Inst. Metals, 46 (11), pp. 1081-1088; Berezovskaya, V.V., Zvigintsev, N.V., Kruglov, A.A., Delayed failure of Fe-Ni-Mo-Ti maraging steels in corrosive medium (1992) Phys. Met. Metallogr., 73 (5), pp. 509-513; Gladkova, S.M., Sarrak, V.I., Filippov, G.A., The effect of hydrogen on the tendency of the N18K9M5T maraging steel to delayed fracture with decreasing temperatures (1989) Problemy Prochnosti, (1), pp. 115-117; Soeno, K., Effect of heat treatment on strain rate sensitivity in tensile properties of 13 Ni-15 Co-10 Mo-0.2 Ti maraging steel (1981) Trans. Iron and Steel Inst. Japan, 21, pp. 469-476; Saiga, Y., Fukagawa, M., Ohyama, M., Delayed failure of high strength steels in environments (1977) Proc. 1977 Meeting of International Institute of Welding, , Tokyo; Grachev, S.V., Berezovskaya, V.V., Kibal'nik, V.D., Structure, mechanical properties, delayed failure, and corrosion cracking of a Fe-Cr-Ni-based maraging steel (1999) XXXV Seminar po Aktual'nym Problemam Prochnosti (XXXV Seminar on Topical Problems of Strength), , Pskov; Bashnin, Yu.A., (1991) Vliyanie Pereplavnykh Protsessov Na Strukturu i Svoistva Stali (Effect of Remelting Processes on the Structure and Properties of Steel), , Moscow: Metallurgiya; (1979) Ispytanie Materialov: Spravochnik (Tests of Materials: Handbook), , Blyumenauer, Kh., Ed., Moscow: Metallurgiya; Artemova, E.N., Sarrak, V.I., Suvorova, S.O., Effect of the γ → α martensite transformation on crack extension in a metastable austenitic steel (1985) Trudy II Vsesoyuznogo Simpoziuma po Treshchinostoikosti Materialov i Elementov Konstruktsii (Proc. II All-Union Seminar on the Cracking Resistance of Materials and Parts of Constructions), pp. 59-60. , "Kiev; Gol'dshtein, M.I., Farber, V.M., (1979) Dispersionnoe Uprochmenie Stali (Precipitation Strengthening of Steel), , Moscow: Metallurgiya; Zhu, F., Mertens, P., Wollenberger, H., Field ion microscopy and atom probing of guinier-preston zones and γ″ precipitates in Cu-2.1 wt % Be (1986) Z. Metallkd., 77 (1), pp. 1-5; Spiridonov, V.B., Strengthening mechanism in chromium-nickel-based or nickel-based maraging steels (1971) Metalloved. Term. Obrab. Met., (4), pp. 2-6; Bogachev, I.N., Zvigintsev, N.V., Mogutnov, B.M., Aging of the martensite of N20TYu steel (1971) Fiz. Met. Metalloved., 31 (4), pp. 813-823; Perkas, M.D., Kardonskii, V.M., (1970) Vysokoprochnye Martensitno-stareyushchie Stali (High-strength Maraging Steels), , Moscow: Metallurgiya; Asayama, Y., Delayed failure and precipitation behavior in maraging steels (1987) Trans. Japan Inst. Metals, 28 (4), pp. 281-290; Berezovskaya, V.V., Grachev, S.V., Mineeva, F.V., Role of texture in the processes of aging and delayed failure of maraging steels (2001) Metalloved. Term. Obrab. Met., (2), pp. 21-24; Smirnov, M.A., Schastlivtsev, V.M., Zhuravlev, L.G., (1999) Osnovy Termicheskoi Obrabotki Stali (Foundations of Heat Treatment of Steel), , Ekaterinburg: IFM UrORAN; Karakishev, S.D., Zvigintsev, N.V., Nemirovskii, M.P., Aging of steel 03N18M4TYu (1992) Phys. Met. Metallogr., (10), pp. 104-111</td>
					</tr>
										<tr>
						<td class="gar">Correspondence Address</td>
						<td>Berezovskaya, V.V.; Ural State Technical University, ul. Mira 19, Ekaterinburg, 620002, Russian Federation; email: postmaster@ustu.ru</td>
					</tr>
										<tr>
						<td class="gar">Language of Original Document</td>
						<td>English</td>
					</tr>
										<tr>
						<td class="gar">Abbreviated Source Title</td>
						<td>Russ. Metall. (Metally)</td>
					</tr>
										<tr>
						<td class="gar">Source</td>
						<td>Scopus</td>
					</tr>
								</tbody>
			</table>
		</dd>
			</dl>

</div>
Поле	Значение
Link	https://www.scopus.com/inward/record.uri?eid=2-s2.0-33748511490&partnerID=40&md5=b965cbecc595396601503e0a9b2baceb
Affiliations	Ural State Technical University, ul. Mira 19, Ekaterinburg, 620002, Russian Federation
References	Filippov, G.A., Sarrak, V.I., Perkas, M.D., The phenomenon of the delayed fracture of maraging steels (1976) Dokl. Akad. Nauk SSSR, 226 (4), pp. 819-822; Filippov, G.A., Sarrak, V.I., Perkas, M.D., Motrenko, V.F., Effect of titanium on the tendency to delayed fracture of maraging steel (1982) Fiz. Met. Metalloved., 54 (1), pp. 163-168; Zaitseva, R.D., Perkas, M.D., Factors influencing the ductility and toughness of maraging steels (1975) Metalloved., Term. Obrab. Met., (9), pp. 2-11; Zabil'skii, V.V., Velichko, V.V., Il'ina, S.G., Delayed fracture of maraging steels: I. The effect of test environment (air or vacuum) (1995) Phys. Met. Metallogr., 80 (6), pp. 676-682; Zabil'skii, V.V., Velichko, V.V., Gil'mutdinov, F.Z., Delayed fracture of maraging steels: 2. Mechanism of grain-boundary embrittlement upon tests in air (1997) Phys. Met. Metallogr., 83 (2), pp. 215-224; Smirnov, M.A., Pushin, V.G., Kareva, N.T., The effect of high-temperature deformation on delayed fracture of maraging steels (1982) Fiz, Met. Metalloved., 53 (5), pp. 1021-1026; Toidorova, I.S., Zabil'skii, V.V., Sarrak, V.I., Delayed fracture of maraging steels (review) (1991) Fiz. Met. Metalloved., (7), pp. 5-11; Khorushi, M., Kuribayasi, K., Kavasaki, S., Ni-Ti maraging steels with high toughness and resistance to delayed failure (1989) Kokoi Tokke Kokho, 3 (4-614), pp. 191-196; Asayama, Y., Delayed failure of ultrahigh strength 18% Ni maraging steels (1982) Japan Inst. Metals, 46 (11), pp. 1081-1088; Berezovskaya, V.V., Zvigintsev, N.V., Kruglov, A.A., Delayed failure of Fe-Ni-Mo-Ti maraging steels in corrosive medium (1992) Phys. Met. Metallogr., 73 (5), pp. 509-513; Gladkova, S.M., Sarrak, V.I., Filippov, G.A., The effect of hydrogen on the tendency of the N18K9M5T maraging steel to delayed fracture with decreasing temperatures (1989) Problemy Prochnosti, (1), pp. 115-117; Soeno, K., Effect of heat treatment on strain rate sensitivity in tensile properties of 13 Ni-15 Co-10 Mo-0.2 Ti maraging steel (1981) Trans. Iron and Steel Inst. Japan, 21, pp. 469-476; Saiga, Y., Fukagawa, M., Ohyama, M., Delayed failure of high strength steels in environments (1977) Proc. 1977 Meeting of International Institute of Welding, , Tokyo; Grachev, S.V., Berezovskaya, V.V., Kibal'nik, V.D., Structure, mechanical properties, delayed failure, and corrosion cracking of a Fe-Cr-Ni-based maraging steel (1999) XXXV Seminar po Aktual'nym Problemam Prochnosti (XXXV Seminar on Topical Problems of Strength), , Pskov; Bashnin, Yu.A., (1991) Vliyanie Pereplavnykh Protsessov Na Strukturu i Svoistva Stali (Effect of Remelting Processes on the Structure and Properties of Steel), , Moscow: Metallurgiya; (1979) Ispytanie Materialov: Spravochnik (Tests of Materials: Handbook), , Blyumenauer, Kh., Ed., Moscow: Metallurgiya; Artemova, E.N., Sarrak, V.I., Suvorova, S.O., Effect of the γ → α martensite transformation on crack extension in a metastable austenitic steel (1985) Trudy II Vsesoyuznogo Simpoziuma po Treshchinostoikosti Materialov i Elementov Konstruktsii (Proc. II All-Union Seminar on the Cracking Resistance of Materials and Parts of Constructions), pp. 59-60. , "Kiev; Gol'dshtein, M.I., Farber, V.M., (1979) Dispersionnoe Uprochmenie Stali (Precipitation Strengthening of Steel), , Moscow: Metallurgiya; Zhu, F., Mertens, P., Wollenberger, H., Field ion microscopy and atom probing of guinier-preston zones and γ″ precipitates in Cu-2.1 wt % Be (1986) Z. Metallkd., 77 (1), pp. 1-5; Spiridonov, V.B., Strengthening mechanism in chromium-nickel-based or nickel-based maraging steels (1971) Metalloved. Term. Obrab. Met., (4), pp. 2-6; Bogachev, I.N., Zvigintsev, N.V., Mogutnov, B.M., Aging of the martensite of N20TYu steel (1971) Fiz. Met. Metalloved., 31 (4), pp. 813-823; Perkas, M.D., Kardonskii, V.M., (1970) Vysokoprochnye Martensitno-stareyushchie Stali (High-strength Maraging Steels), , Moscow: Metallurgiya; Asayama, Y., Delayed failure and precipitation behavior in maraging steels (1987) Trans. Japan Inst. Metals, 28 (4), pp. 281-290; Berezovskaya, V.V., Grachev, S.V., Mineeva, F.V., Role of texture in the processes of aging and delayed failure of maraging steels (2001) Metalloved. Term. Obrab. Met., (2), pp. 21-24; Smirnov, M.A., Schastlivtsev, V.M., Zhuravlev, L.G., (1999) Osnovy Termicheskoi Obrabotki Stali (Foundations of Heat Treatment of Steel), , Ekaterinburg: IFM UrORAN; Karakishev, S.D., Zvigintsev, N.V., Nemirovskii, M.P., Aging of steel 03N18M4TYu (1992) Phys. Met. Metallogr., (10), pp. 104-111
Correspondence Address	Berezovskaya, V.V.; Ural State Technical University, ul. Mira 19, Ekaterinburg, 620002, Russian Federation; email: postmaster@ustu.ru
Language of Original Document	English
Abbreviated Source Title	Russ. Metall. (Metally)
Source	Scopus