Simulation of the surface-layer properties in ultrasonic planing / Osipenkova G.A., Pegashkin V.F., Filimonov I.E. // Russian Engineering Research. - 2008. - V. 28, l. 11. - P. 1109-1111.

ISSN:

1068798X

Type:

Article

Abstract:

In the ultrasonic-planing method proposed, torsional oscillations of the tool are used to machine external cylindrical surfaces. Formulas describing the indenter trajectory over the surface of the part are presented. The indenter trajectory and the machining parameters are such that the required microrelief and microprojection configuration may be obtained, depending on the specified surface properties. © Allerton Press, Inc. 2008.

Author keywords:

Index keywords:

Surface properties; Cylindrical surfaces; External-; Indenter; Machining parameters; Microrelief; Torsional oscillations; Ultrasonics

DOI:

10.3103/S1068798X08110178

Смотреть в Scopus:

https://www.scopus.com/inward/record.uri?eid=2-s2.0-58049207864&doi=10.3103%2fS1068798X08110178&partnerID=40&md5=b2006a2f05a876071ef579c93364d0b7

Соавторы в МНС:

Другие поля

Поле	Значение
Link	https://www.scopus.com/inward/record.uri?eid=2-s2.0-58049207864&doi=10.3103%2fS1068798X08110178&partnerID=40&md5=b2006a2f05a876071ef579c93364d0b7
Affiliations	Nizhni Tagil Scientific Institute, Ural State Technical University, Ural Polytechnic Institute, Russian Federation
References	Shneider, Yu.G., (1982) Ekspluatatsionnye Svoistva Detalei S Regularnym Mikrorel'efom (Operation Properties of Parts With Regular Microrelief), , Leningrad: Mashinostroenie; RF Patent 2203789; RF Patent 2095217
Correspondence Address	Osipenkova, G.A.; Nizhni Tagil Scientific Institute, Ural State Technical University, Ural Polytechnic InstituteRussian Federation
Language of Original Document	English
Abbreviated Source Title	Russ. Eng. Res.
Source	Scopus